Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Tail light

Before you can start, open the boot of your Fiat Bravo. This will expose the screws that secure the rear light to the car. Begin by unscrewing and removing these screws. Once the screws are removed, the rear light will be free. Proceed by pulling the light out of its housing. At this point, disconnect the rear connector that powers the light bulbs. Once you have completed this step, you can fully remove the rear light, successfully finishing the disassembly.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Fiat Bravo
How to Remove the Rear Light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to remove the rear light on your Fiat Bravo? Let’s see how to proceed with the disassembly in this video. Open the boot lid, unscrew the screws …
How to Dismantle the Rear Light of the Fiat Bravo 2
How to Dismantle the Rear Light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing th…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos