Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Tail light

Fiat Bravo - Tail light

Tail Light Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
Replacing the Rear Light Bulb of the Fiat Bravo
When the stop bulb of the Fiat Bravo burns out, it is important for your safety to replace it as soon as possible: here’s how. Open the boot, position …Read all…
Posted on 29 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Dismantle the Rear Light of the Fiat Bravo 2
Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing the side …Read all…
Posted on 9 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Rear Bulbs on the Fiat Bravo
Today, learn how to replace the position and stop bulb on the second series Fiat Bravo. Open the boot of the vehicle. Get a Phillips screwdriver or a 10mm hex …Read all…
Posted on 2 July 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Remove the Rear Light of a Fiat Bravo
Before you can start, open the boot of your Fiat Bravo. This will expose the screws that secure the rear light to the car. Begin by unscrewing and removing …Read all…
Posted on 9 May 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Remove the Rear Light on a Fiat Bravo
Want to remove the rear light on your Fiat Bravo? Let’s see how to proceed with the disassembly in this video. Open the boot lid, unscrew the screws located …Read all…
Posted on 10 March 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (4) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (22) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos