Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Shift knob

Fiat Bravo - Shift knob

Shift Knob Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to remove the gear knob of the Fiat Bravo
To disassemble the gear knob located inside the cabin of your Fiat Bravo correctly and safely, you must follow all the steps described in our new guide. First …Read all…
Posted on 16 March 2025 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Remove Gear Knob on Fiat Bravo
Is the gear knob in your car broken? Let's look at removing the gear knob on a Fiat Bravo. Replace the knob if damaged or if you want to change the model. Take …Read all…
Posted on 25 May 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replace the Gear Knob on Your Fiat Bravo
Want to replace the gear knob on your Fiat Bravo? In this video, see how to do it. Use a plastic lever to disconnect the logo on top of the knob; grasp the …Read all…
Posted on 4 April 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Gear Knob on a Fiat Bravo
Do you want to replace the gear knob on a Fiat Bravo? In this video, you will see how to do it: use a plastic lever to detach the logo; unscrew the pin with …Read all…
Posted on 29 March 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos