Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Windshield wipers

Fiat Bravo - Windshield wipers

Windshield Wipers Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Wiper Blades on a Fiat Bravo 2
In this tutorial, you will learn how to replace the wiper blades on a Fiat Bravo 2 by following a few simple steps: first, purchase new wiper blades from an …Read all…
Posted on 13 September 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing the Windscreen Washer Reservoir on a Fiat Bravo
As shown in the video, remove the wheel by raising the car with a jack and unscrewing the relevant bolts. Unscrew the screws of the wheel arch liner and remove …Read all…
Posted on 4 June 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing the Windscreen Washer Pump on Fiat Bravo 2007
Remove the bolts from the left front wheel, lift the car, and remove the wheel. Next, unscrew the screws of the wheel arch liner. Remove the wheel arch liner. …Read all…
Posted on 1 May 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Wiper Blade on Fiat Bravo
Is the wiper blade on your Fiat Bravo due for replacement? Here's how to change it. Take the front wiper blade (to be replaced) in your hands, gently pull the …Read all…
Posted on 6 April 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos