Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Rear bumper

Fiat Bravo - Rear bumper

Rear Bumper Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to disassemble the rear bumper of the Fiat Bravo
Let's discover the steps for disassembling and replacing the rear bumper of the Fiat Bravo. First of all, let's move to the rear of the vehicle and start …Read all…
Posted on 13 December 2024 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Remove the Rear Bumper of the Fiat Bravo
This tutorial will guide you through the steps to remove the rear bumper of the Fiat Bravo. The first step is to open the boot and remove the rear lights. Once …Read all…
Posted on 2 October 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos