Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Engine

Fiat Bravo - Engine

Engine Fiat Bravo (1995-2001 / )

Fiat Bravo (1995-2001 / )
Replacing the Engine Cylinder Head Gasket
Let’s see how to replace the engine cylinder head gasket. Remove the alternator belt and any accessory belts (power steering, air conditioning) and unscrew …Read all…
Posted on 5 March 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Replacement of Rocker Cover Gasket
Before applying the new gasket, thoroughly clean the respective seating both under the rocker cover and on the cylinder head: it is important to remove any …Read all…
Posted on 21 February 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Replacement of Cylinder Head Fixing Pins
Before applying the new cylinder head gasket, re-thread the fixing holes on the block, choosing the correct pitch for the tap. During this operation, ensure …Read all…
Posted on 19 February 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Exhaust Manifold Gasket Replacement
Before applying the new gasket to the exhaust manifold, thoroughly clean the gasket seat, removing any dirt and deposits that could compromise its adhesion and …Read all…
Posted on 19 February 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Replacing the Camshaft Oil Seal
The camshaft oil seal may deteriorate, causing oil leaks that contaminate the entire timing area; replacing it is fairly straightforward, except that you will …Read all…
Posted on 19 February 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Cylinder Head Gasket in Engine Block
In the engine block, the pistons of the cylinder head move up and down in cylinder holes. These pistons are connected to rods and a crankshaft that powers the …Read all…
Posted on 18 February 2026 by ScegliAuto
Fiat Bravo (1995-2001 / )
Replacement of Intake Manifold Gasket
Before proceeding with the installation of the new intake manifold gasket, it is essential to clean the surfaces of both the manifold and the cylinder head, …Read all…
Posted on 18 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos