Do it yourself
| ||||
|
Fiat Bravo - -board computer
Fiat Bravo (2007-2014 / Bravo2)
How to deactivate the seat belt warning sound on the Fiat Bravo The beep that alerts passengers to wear their seatbelt is very important inside a vehicle, but sometimes it can become annoying, especially if we are not …read all… Posted on 3 May 2024 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to change the timetable on the Fiat Bravo To be able to set and modify the time on the car it is necessary to proceed as follows: access the passenger compartment, insert the ignition key and turn on …read all… Posted on 4 November 2022 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to reset the service on Fiat Bravo. In this video tutorial you can see how you can reset the maintenance warning light on Fiat Bravo with simple essential steps. First you must go to an …read all… Posted on 24 September 2022 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to reset the maintenance indicator of the Fiat Bravo To prepare the on-board computer for this operation, it will be necessary to turn the key in the ignition to position 1 and close all the doors, then using the …read all… Posted on 3 October 2023 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How can you reset the service by cutting the Fiat Bravo If the service warning light comes on on the instrument panel display, it means that the time has come, either due to mileage reached or due to time limit, to …read all… Posted on 11 September 2023 by ScegliAuto Airbags (1) Alternator (1) Loudspeaker (3) Shock absorbers (2) Antenna (1) Car stereo (13) Battery (2) Air Vents (1) Arm (1) Spark plugs (1) Glow plugs (1) Bodywork (1) Control unit (1) Timing belt (2) Air conditioning (1) Air conditioning controls (3) -board computer (5) Checks and maintenance (23) Dashboard (3) Mass air flow sensor (1) Brake discs (2) Side indicator light (1) Headlight (4) Tail light (5) Fog lights (4) Air filter (6) Cabin air filter (10) Diesel filter (6) Oil filter (4) Hand brake (1) Clutch (1) Grille (3) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (9) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (2) License plate light (1) Third brake light (3) Handle (1) Engine (7) Engine oil (3) Door panel (7) Front bumper (3) Brake pads (5) Gear Shift Knob (3) Instrument cluster (4) Radiator (2) Fuse box (12) Parking sensors (1) Suspensions (2) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (4) Turbine (1) Valve (1) EGR valve (3) Steering wheel (3) |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |