Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to deactivate the seat belt warning sound on the Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: -board computer
Operation: How to deactivate the seat belt warning sound on the Fiat Bravo

The beep that alerts passengers to wear their seatbelt is very important inside a vehicle, but sometimes it can become annoying, especially if we are not carrying passengers. To deactivate the acoustic system of the seatbelts in a Fiat Bravo vehicle, we need to use the OBD port and a diagnostic computer to modify the program. We turn on the ignition and connect the two ports. From the computer, we select the model of the car and the year. We modify by selecting the appropriate option to disable the beep, and once done, we disconnect everything to turn off and on the ignition and check that the operation was successful.


Posted on 3 May 2024 by ScegliAuto



How to deactivate the seat belt alarm on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) For illustrative purposes, let's see how to deactivate the safety belt alarm on the Fiat Bravo, but also on the Punto and Panda; the seat belt alarm
How to replace the timing belt of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) The replacement of the timing belt on a Fiat Bravo MultiJet vehicle must be done based on the condition of the belt and the engine. Generally, it can
How and when to replace the timing belt on the Fiat Bravo 1.6 Multijet
Fiat Bravo (2007-2014 / Bravo 2) In this guide we will see how and when to replace the timing belt on the Fiat Bravo 1.6 Multijet. The replacement of the belt on a diesel engine of s

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos