Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the driver's seat of the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Seat

The steps to disassemble the driver's seat of a Fiat Bravo vehicle are as follows:

The first step is to push the seat backwards.
The second step is to remove the connector cover.
The third step is to disconnect the car battery and then disconnect the seat connector.
The fourth step is to unscrew the bolts.
The fifth step is to completely remove the seat.
For the passenger seat, we follow the same steps.
The assembly also includes cleaning the area and lubricating with WD40 spray.
By following the steps in reverse, you can assemble the seats.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Fiat Bravo 1.4
How to Reset the "Service" Light on a Fiat Bravo 1.4
Fiat Bravo (2007-2014 / Bravo 2) Before starting, sit in the driver's seat of your Fiat Bravo 1.4. Activate the instrument cluster by turning the key in the ignition switch. Next, re…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Disable the Seatbelt Alarm on a Fiat Bravo 2
How to Disable the Seatbelt Alarm on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) This guide illustrates how to disable the seatbelt alarm on the Fiat Bravo, as well as on the Punto and Panda; the seatbelt alarms should never be di…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos