Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for the Fiat Bravo MK2.

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

If the battery of the Fiat Bravo has let us down and does not hold the subsequent charge, we must proceed with its replacement. We open the hood of the engine compartment, find the battery on the driver's side, start by unscrewing the two screws that secure the bar above the battery, remove the plastic cover upstream, loosen and remove the negative pole clamp and repeat the operation with the positive pole.

We release the strap that holds it and remove the old battery, insert a new one of the same characteristics in its place, hook the strap back on, put back the clamps, the bar and the cover.


Posted on 12 April 2025 by ScegliAuto


Related tutorials

Removing Alternator from Fiat Bravo
Removing Alternator from Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replacing the alternator on a Fiat Bravo? First, disconnect the battery terminals. Locate the power battery and disconnect the terminals. Remove the …
How to Replace the Battery on a Fiat Bravo
How to Replace the Battery on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the front bonnet of your Fiat Bravo. First, remove and move the side bar located on the upper right side of the battery. N…
How to Replace the Battery in a Fiat Bravo
How to Replace the Battery in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the battery in a Fiat Bravo, open the bonnet to access the components in the engine bay. The battery is located on the right side of the b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos