Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Bravo
  6. : Replacing the tappet cover gasket

Fiat Bravo - Video tutorial

Model: Fiat Bravo - Years 1995-2001
Part: Engine
Operation: Replacing the tappet cover gasket

Before applying the new gasket, carefully clean the relative seat both under the tappet cover and on the cylinder head: it is important to eliminate any residual dirt and encrustation that could compromise adherence and therefore the seal of the gasket; then apply the gasket inside the special groove obtained right along the edge of the lid, making it adhere correctly; also apply sealant mastic only in correspondence with the corners of the fixing brackets of the camshaft sliding bushing and then position the cover fixing it with the relative pins.


Posted on 14 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Bravo 2007-2014 - When does the engine warning light come on in the FIAT Bravo 1.6 diesel? Read Answer
    • Bravo 2007-2014 - What does the turning on of the engine light on the Fiat Bravo mean? Read Answer
    • Bravo 2007-2014 - How much does it cost to replace the crankshaft oil seal on the Fiat Bravo 1600 diesel? Read Answer
    • Bravo 2007-2014 - How many kw does the Fiat Bravo 1.6 mjt have? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos