Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Follow these steps to replace the battery in a Fiat Bravo when it runs out. Open the bonnet and locate the battery on the driver's side. To remove it, unscrew the bolts securing the bar on top. Once removed, disconnect the terminals from the battery, starting with the negative terminal, and place the cables so they do not touch any metal parts.

Release the strap holding the battery in place and pull out the old battery. Replace it with the new one, secure it with the strap, and reconnect the terminals, starting with the positive terminal, then refit the bar.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Fiat Bravo
How to Replace the Battery in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the battery in a Fiat Bravo, open the bonnet to access the components in the engine bay. The battery is located on the right side of the b…
How to Replace the Battery on a Fiat Bravo
How to Replace the Battery on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the front bonnet of your Fiat Bravo. First, remove and move the side bar located on the upper right side of the battery. N…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos