Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Before you can start, open the front bonnet of your Fiat Bravo. First, remove and move the side bar located on the upper right side of the battery.

Next, unscrew and remove the screws securing the two terminals to the battery, then disconnect them. After this, unscrew and remove the bolt that secures the battery hold-down strap, then extract the battery from its location.

Once you have completed this step, the disassembly is finished. To fit the new battery, follow these instructions in reverse, and the replacement will be complete.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Fiat Bravo
How to Replace the Battery in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Follow these steps to replace the battery in a Fiat Bravo when it runs out. Open the bonnet and locate the battery on the driver's side. To remove it…
Removing Alternator from Fiat Bravo
Removing Alternator from Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replacing the alternator on a Fiat Bravo? First, disconnect the battery terminals. Locate the power battery and disconnect the terminals. Remove the …
How to Replace the Diesel Filter on a Fiat Bravo?
How to Replace the Diesel Filter on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In this video, you will see how to replace the diesel filter on a Fiat Bravo 198, a very simple operation. First, disconnect the battery to work safe…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos