Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, you will see how to replace the diesel filter on a Fiat Bravo 198, a very simple operation. First, disconnect the battery to work safely.

Then, locate the filter and detach the two upper pipes, the first by pressing the two small green buttons on the sides, and the second by pressing the white clip with a screwdriver. Once done, undo the fixing bolt with a 10 mm spanner, remove the filter, and disconnect the lower connector.

Also, undo this last one as you will insert it into the replacement filter, which should be fitted by following the exact reverse procedure.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…
Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the diesel filter on a second series Fiat Bravo in simple and quick steps. First, op…
How to Replace the Diesel Filter on a Fiat Bravo?
How to Replace the Diesel Filter on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the diesel filter on a Fiat Bravo, open the bonnet to access the components inside the engine bay. Here, on the left side next to the engi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos