Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Diesel fuel filter

In this video tutorial, you will learn how to remove and replace the diesel filter on a second series Fiat Bravo in simple and quick steps. First, open the bonnet and start by removing the diesel pipes from the filter, which is located on the left (right next to the coolant reservoir); disconnect the electrical connector and unscrew the nuts of the diesel filter bracket to remove it. At this point, replace the cartridge with a new one of the correct type and the original spare part; apply the reverse procedure for reassembly!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will learn how and when to replace the timing belt on the Fiat Bravo 1.6 MultiJet. The timing belt replacement on a small capacity…
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos