Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Diesel fuel filter

Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the hood of the vehicle and start disconnecting the inlet and outlet pipes of the diesel filter, located next to the coolant reservoir; then we unscrew the screw of the bracket with a 10 mm wrench, as shown in the video. At this point, we remove the diesel filter cartridge, replacing it with the new original one; we reassemble and connect the diesel filter correctly, starting the engine!

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the diesel filter on a second series Fiat Bravo in simple and quick steps. First, op…
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will learn how and when to replace the timing belt on the Fiat Bravo 1.6 MultiJet. The timing belt replacement on a small capacity…
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos