Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

Hello everyone; in this video, I will show you how to replace the diesel filter on a Fiat Bravo. First, gather a pair of pliers and a ratchet wrench.

Now we can start the filter replacement. Take the pliers and, pressing on the clips at the ends, release the fuel supply pipes so we can remove them.

Once this is done, take the ratchet wrench and unscrew the bracket holding the filter. Pull out the filter and disconnect the connector located at the bottom.

Finally, take the new filter, connect the connector, attach it to the bracket, and insert the fuel supply pipes.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter of the Fiat Bravo?
How to Replace the Fuel Filter of the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the fuel filter of the Fiat Bravo, open the bonnet to access the engine bay: the fuel filter is located on the left side, next to the engi…
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…
How to Remove and Replace the Air Filter on a Fiat Bravo
How to Remove and Replace the Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to replace the air filter in your car? Here’s how to remove and replace the engine air filter on a Fiat Bravo: lift the car using a column lift …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos