Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Air Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

Want to replace the air filter in your car? Here’s how to remove and replace the engine air filter on a Fiat Bravo: lift the car using a column lift or jack and secure it. Locate the air filter housing, then unscrew the securing screws with a socket wrench.

Remove the cover of the filter box and extract the worn air filter.

Insert a new filter into the designated housing, ensuring it fits snugly against the walls. Finally, reattach the air box cover and tighten the screws with the wrench.

Lower the car to the ground after maintenance.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …
How to Replace the Air Filter on a Fiat Bravo
How to Replace the Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To change the engine air filter on a Fiat Bravo: lift the car on a column lift or jack and unscrew the plastic undertray using a socket wrench (with …
How to replace the air filter in a Fiat Bravo
How to replace the air filter in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the air filter on the second generation Fiat Bravo, open the bonnet and locate the air filter box in the engine bay, connected to the inta…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos