Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

To replace the air filter on the second generation Fiat Bravo, open the bonnet and locate the air filter box in the engine bay, connected to the intake duct. Release the metal clips or unscrew the screws securing the cover.

Carefully lift the cover and remove the used filter. Check the inside of the box and clean it of dust or debris.

Insert the new filter, ensuring it is oriented correctly as indicated by the guides. Refit the cover and secure it again with clips or screws.

Close the bonnet and start the engine to check that everything is functioning correctly.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Fiat Bravo
Replacing the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the cabin air filter of a second series Fiat Bravo. The air filter is located at the…
How to Remove and Replace the Air Filter on a Fiat Bravo
How to Remove and Replace the Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to replace the air filter in your car? Here’s how to remove and replace the engine air filter on a Fiat Bravo: lift the car using a column lift …
How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos