Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Cabin air filter

In this video tutorial, you will learn how to remove and replace the cabin air filter of a second series Fiat Bravo. The air filter is located at the bottom on the passenger side: access the car and remove the side plastic panel by detaching it by hand: then simply remove the cover of the air filter and extract it. At this point, replace it with a new one, inserting it in the correct orientation (usually indicated by printed arrows on the filter); then reassemble the cover and the plastic panel with the air diffuser!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on the Fiat Bravo
Replacing the Cabin Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this brief and simple guide, learn how to replace the cabin air filter on the Fiat Bravo by following the instructions below. First, get inside th…
Change the Air Conditioning Filter on a Fiat Bravo
Change the Air Conditioning Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you replace the cabin air filter on a Fiat Bravo? Follow these steps to replace it. Open the front door and, using a lever, remove the plastic…
How to Remove the Cabin Air Filter on a Fiat Bravo
How to Remove the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Learn how to remove the cabin air filter on a Fiat Bravo. The cabin filter is located at the bottom right of the centre tunnel. Use a plastic lever t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos