Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Cabin Filter on Fiat Bravo

Model: Fiat Bravo - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Cabin air filter

See other generations:
Video tutorial

Want to replace the cabin air filter on the Fiat Bravo? Remove the covers in the engine bay to access the filter. The cabin filter is located in the engine bay. Unscrew the screws of the trim in the lower part of the windscreen.

Remove the cover of the filter housing; extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly against the walls of the box, refit the filter box cap and tighten the cover.

Check the correct installation of the parts mounted under the glove compartment. Close the engine bay.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Fiat Bravo
Replacing the Cabin Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this brief and simple guide, learn how to replace the cabin air filter on the Fiat Bravo by following the instructions below. First, get inside th…
How to Remove the Cabin Air Filter on a Fiat Bravo
How to Remove the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Does removing the cabin air filter seem like a difficult task? Let's see in this video how to remove and replace the cabin air filter on a Fiat Bravo…
How to Remove the Cabin Air Filter on a Fiat Bravo
How to Remove the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Learn how to remove the cabin air filter on a Fiat Bravo. The cabin filter is located at the bottom right of the centre tunnel. Use a plastic lever t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos