Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the 2010 Fiat Bravo.

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

Today we will explain how to replace the cabin air filter on a 2010 Fiat Bravo in less than 5 minutes. The filter is located inside the cabin, specifically under the glove compartment on the passenger side.

To replace it, we need to remove part of the lower dashboard using a flathead screwdriver. Once we have access to the filter, we remove the cover and take out the worn filter.

We clean the housing of any dust and dirt residues, then insert the new filter inside and close the cover. We reassemble the part of the dashboard that was previously removed and start the vehicle's engine to check that there are no warning lights related to the filter on the instrument panel display.


Posted on 21 January 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Fiat Bravo
Replacing the Cabin Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this brief and simple guide, learn how to replace the cabin air filter on the Fiat Bravo by following the instructions below. First, get inside th…
How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …
How to Remove the Cabin Air Filter on a Fiat Bravo
How to Remove the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Learn how to remove the cabin air filter on a Fiat Bravo. The cabin filter is located at the bottom right of the centre tunnel. Use a plastic lever t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos