Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Fiat Bravo 2?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Dashboard

See other generations:
Video tutorial

If you have not yet been able to locate the OBD2 port inside your second series Fiat Bravo, do not worry because in the following guide you will find the correct procedure to access the fuses in just a few seconds. First of all, enter the car from the driver's side and proceed with the removal of the entire plastic panel on the left side of the dashboard.

Once the entire plastic panel has been removed, locate the OBD2 port you were looking for and the procedure is successfully completed. From now on, you can connect any diagnostic tool compatible with the vehicle to it.


Posted on 5 April 2025 by ScegliAuto


Related tutorials

Where to Find the OBD2 Port of the Fiat Bravo
Where to Find the OBD2 Port of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this mini guide for owners of a second-generation Fiat Bravo, you will learn how to access the OBD2 port of the vehicle. First, enter the cabin fr…
Where Are the Fuses in the Fiat Bravo?
Where Are the Fuses in the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) Any fuse in the Fiat Bravo is positioned inside one of the two fuse boxes present in the vehicle: the first of these is located inside the cabin, in …
What is the fuse layout for the Fiat Bravo?
What is the fuse layout for the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) This video shows where the fuse boxes are located in the Fiat Bravo and their respective layouts, which can be consulted if you need to check the fus…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos