Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD2 Port of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this mini guide for owners of a second-generation Fiat Bravo, you will learn how to access the OBD2 port of the vehicle. First, enter the cabin from the driver's side and ensure the vehicle is completely off. Once done, focus on the left side of the dashboard and use a crosshead screwdriver to remove the two screws securing the plastic panel.

After unscrewing, detach the panel to access the OBD2 port you were looking for.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port located on the Fiat Bravo 2?
Where is the OBD2 port located on the Fiat Bravo 2?
Fiat Bravo (2007-2014 / Bravo 2) If you have not yet been able to locate the OBD2 port inside your second series Fiat Bravo, do not worry because in the following guide you will find…
Where is the OBD port located on the Fiat Bravo 2010?
Where is the OBD port located on the Fiat Bravo 2010?
Fiat Bravo (2007-2014 / Bravo 2) In order to connect a diagnostic tool to your 2010 Fiat Scudo, you need to know the exact location of the OBD port. Below we will describe the steps …
Removing Door Panel from Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove the door panel from a Fiat Bravo. First, open the door and remove all the plastic caps that hide…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos