Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel filter located in the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel filter

See other generations:
Video tutorial

In this video we can see where the fuel filter is located in the Fiat 500 and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the filter is located underneath the vehicle, specifically behind the tank and above the spare wheel.

To replace it, it will be sufficient to lower the spare wheel itself, go underneath the vehicle, disconnect the two tubes and unscrew the bolts of the fixing bracket. Once this is done, we can place the replacement and reassemble everything following the reverse procedure.


Posted on 29 November 2024 by ScegliAuto


Related tutorials

Where is the cabin air filter located in the Fiat 500
Where is the cabin air filter located in the Fiat 500
Fiat 500 (2007-2024 / 312) If you need to replace the cabin air filter located inside your new Fiat 500, but you don't know where the box containing it is, read this guide care…
How to Change the Fuel Pump on Fiat 500
How to Change the Fuel Pump on Fiat 500
Fiat 500 (1957-1975 / Epoca) Replace the fuel pump on a Fiat 500. Here’s how to dismantle it. Lift the rear bonnet of the car, locate the fuel pump as shown in the video. Use a s…
Where is the oil pressure sensor located in the Fiat 500?
Where is the oil pressure sensor located in the Fiat 500?
Fiat 500 (2007-2022 / 312) In this video, you will see where the engine oil pressure sensor is located in the Fiat 500, useful if you need to replace it due to a fault. As show…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos