Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil pressure sensor located in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Checks and maintenance

In this video, you will see where the engine oil pressure sensor is located in the Fiat 500, useful if you need to replace it due to a fault. As shown, the sensor is positioned in the lower left area of the engine, just behind the oil filter. To access it, you will need to go underneath the vehicle, taking all necessary safety precautions, and wait for the engine to cool completely. To remove the sensor, simply unscrew it with a spanner and disconnect the connector.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Fiat 500 X
How to reset the TPMS light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) The tire pressure warning light activates when it is necessary to adjust the pressure; after updating the tire pressure, following the guidelines ind…
Where is the crankshaft position sensor located in the Fiat 500?
Where is the crankshaft position sensor located in the Fiat 500?
Fiat 500 (2007-2024 / 312) In this video we can see where the crankshaft position sensor is located in the Fiat 500, useful in case we need to replace it, an extremely simple a…
Where is the temperature sensor on the Fiat 500?
Where is the temperature sensor on the Fiat 500?
Fiat 500 (2007-2024 / 312) In this video, you will see where the coolant temperature sensor is located on a Fiat 500 or even on a 500 Abarth; the sensor's position is the same.…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos