Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to change the fuel pump on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Fuel pump
Operation: How to change the fuel pump on Fiat 500

We replace the fuel pump on a Fiat 500. Let's see how it is disassembled. We lift the rear hood of the car, we identify the fuel pump as in the video. With a socket wrench we unscrew the tightening screws placed on the sides. Once the screws above the plate of the container have been removed: remove the fuel pump from the engine compartment (disconnect the circulation pipes). We take out the fuel pump and mount the new pump in the engine compartment (we connect hoses and cables). We screw in the fastening screws of the fuel pump. We close the front hood once we have replaced the filter. We turn on and test the Fiat 500.


Posted on 10 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2014-2022 - What tool is needed to remove the fuel pump in the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the diesel pump on the Fiat 500 1.5 MultiJet? Read Answer
    • 500 2007-2022 - Where is the Fiat 500 petrol pump located? Read Answer
    • 500 2007-2022 - Why doesn't fuel reach the engine of the Fiat 500? Read Answer
    • 500 2007-2022 - How much does the Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500l diesel pump located? Read Answer
    • 500 2014-2022 - What do the problems with the fuel pump of the Fiat 500 depend on? Read Answer
    • 500 2012-2023 - Where is the petrol pump of the Fiat 500 located? Read Answer
    • 500 2007-2023 - How much can a Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500L float located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos