Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the windshield washer pump of the Fiat 500 1.2

Model: Fiat 500 312 - Years 2007-2024
Part: Pump

This short and simple guide will show us how to disassemble and replace the windshield washer pump of the Fiat 500 1.2 petrol. First, we open the hood of the car and start disassembling the front bumper, unscrewing all the fixing screws and disconnecting the various electrical connectors; we find the windshield washer fluid tank and its pump behind the bumper, as shown in the video. At this point, we disconnect the electrical connector and the windshield washer fluid tubing, removing and replacing the pump with the new one; finally, we reassemble everything!

Posted on 14 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Washer Pump in the Fiat 500?
How to Replace the Washer Pump in the Fiat 500?
Fiat 500 (2007-2022 / 312) As shown in this tutorial, replacing the washer pump in the Fiat 500 is a very simple and quick task. First, lift the front right of the vehicle with…
How to Replace the Windscreen Washer Fluid in a Fiat 500
How to Replace the Windscreen Washer Fluid in a Fiat 500
Fiat 500 (2007-2021 / 312) How to replace the windscreen washer fluid in a Fiat 500? Let's look at the necessary maintenance on the 500. Open the car door and pull up the engin…
Removal and Replacement of the Windscreen Washer Reservoir on the Fiat 500
Removal and Replacement of the Windscreen Washer Reservoir on the Fiat 500
Fiat 500 (2007-2024 / 312) Follow these instructions to remove and replace the windscreen washer reservoir on the Fiat 500 by following these simple steps. First, you need to r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos