Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fixed Windows of the Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Windshield

See other generations:
Video tutorial

This brief and simple guide provides instructions for removing all fixed windows, including the rear window, windscreen, and side windows, of the classic Fiat 500. First, start by removing the rear window; spray some lubricant to ease the removal of the seal, then gently remove the rear window as shown in the video.

Next, perform the exact same operation to remove the windscreen and side windows, ensuring to clean any rust before refitting the new windows!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) Today's guide shows you the steps to adjust the idle speed of the classic Fiat 500. First, open the bonnet and locate the throttle cable adjuster at …
Fiat 500 (1957-1975 / Epoca) In today's video tutorial, you will see the main steps needed to remove the engine from the body of the Classic Fiat 500. First, open the rear bonnet…
Fiat 500 (1957-1975 / Epoca) To replace the rear suspension on a classic Fiat 500, lift the car using a ramp or jack so that the wheels are not in contact with the ground. Once l…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos