Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window regulator mechanism in the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side window

See other generations:
Video tutorial

In this tutorial we can see how to replace the window regulator mechanism in the Fiat 500, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the door in which we will work and remove the small door located inside the window regulator console, the handle frame and the plastic side caps.

Then unscrew all the screws that have just been released using both a 5mm hex key and a cross-tipped screwdriver, separate the panel from the door and disconnect the lock rope. At this point, all that's left is to remove the protective cover, disconnect the mechanism connector and disassemble it with a 10mm socket wrench.

To install the replacement and reassemble everything, just follow the reverse procedure.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

How to Replace the Window Regulators in a Fiat 500?
How to Replace the Window Regulators in a Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the window regulators in a Fiat 500, a simple operation but requiring good manual skills. First, unscre…
How to Replace the Roof of the Fiat 500?
How to Replace the Roof of the Fiat 500?
Fiat 500 (2007-2024 / 312) To replace the roof of the Fiat 500, lower it completely so that all the fastening screws of the opening and closing mechanism are visible: once the …
How to replace the gear knob and gaiter on the Fiat 500
How to replace the gear knob and gaiter on the Fiat 500
Fiat 500 (2007-2024 / 312) Today, you will replace the gear knob and gaiter on the Fiat 500. To carry out the replacement, remove the top part of the knob to access the interna…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos