Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Engine

See other generations:
Video tutorial

In today's video tutorial, you will see the main steps needed to remove the engine from the body of the Classic Fiat 500. First, open the rear bonnet and disconnect the wiring and the intake hose; then disconnect the ignition cables and the fuel lines, as shown in the video.

At this point, lift the vehicle to unscrew the bolts of the rear bumper; then disconnect the arms from the braking system and unscrew the suspension bolts: finally, disconnect the engine mount to lower the engine, following the video to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to convert a vintage Fiat 500 to electric
How to convert a vintage Fiat 500 to electric
Fiat 500 (1957-1975 / Epoca) In this animation video, we can see how it is possible to convert a classic Fiat 500 into an electric vehicle without altering its nature. The compan…
How to Refit the Engine on the Classic Fiat 500
How to Refit the Engine on the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this tutorial, you will find the instructions to refit the entire engine block onto the body of the classic Fiat 500. First, open the rear bonnet …
How to Remove the Starter Motor from a Classic Fiat 500
How to Remove the Starter Motor from a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In today's video, see how to proceed with the removal and refurbishment of the starter motor from a classic Fiat 500. This tutorial also applies to t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos