Do it yourself
Frequently asked questions about cars and motorcycles

How to Refit the Engine on the Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Engine

See other generations:
Video tutorial

In this tutorial, you will find the instructions to refit the entire engine block onto the body of the classic Fiat 500. First, open the rear bonnet and position the engine in its compartment; it is necessary to remove the rear iron bumper. Then, secure the engine to the body using the appropriate side bolts; refit the engine cover, securing it properly to both the engine and the body.

Remove the jack and make the various necessary connections for operation, including electrical and fuel connections.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the c…
Fiat 500 (1957-1975 / Epoca) In today's video, see how to proceed with the removal and refurbishment of the starter motor from a classic Fiat 500. This tutorial also applies to t…
Fiat 500 (2007-2024 / 312) In this tutorial, you will see how to replace the remote battery on a Fiat 500, a very simple and quick operation. For this, you will need a small fl…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos