Do it yourself
Frequently asked questions about cars and motorcycles

Timing Instructions for Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Checks and maintenance

See other generations:
Video tutorial

Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the crankshaft pulley and aligning it with the symbol on the engine casing, as illustrated in the video; then adjust the valves by following the indicated instructions.

At this point, use a stroboscopic lamp or a homemade tool to set the exact degrees of advance and retard for optimal engine performance!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) This guide will show you the information needed to time the engine of the classic Fiat 500. First, open the rear bonnet and locate the distributor, w…
Fiat 500 (1957-1975 / Epoca) In this video we can see how to adjust the tappets of a vintage Fiat 500. The desired adjustment is 0.15 for the intake valves, which is the second o…
Fiat 500 (1957-1975 / Epoca) In this video, see how to start a classic Fiat 500 that has been idle for years. Two approaches were taken: The first involved the fuel system, clean…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos