Do it yourself
Frequently asked questions about cars and motorcycles

How to Time the Engine of the Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Checks and maintenance

See other generations:
This video is currently unavailable

This guide will show you the information needed to time the engine of the classic Fiat 500. First, open the rear bonnet and locate the distributor, which controls the spark sent to the spark plugs for combustion. To time the engine, a stroboscopic lamp is necessary, although you can also time it using the references marked on the distributor and the engine casing.

By removing the distributor cover, you can adjust the points as indicated in the instruction manual, following the video tutorial to the end.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) In this tutorial, you will find the instructions to refit the entire engine block onto the body of the classic Fiat 500. First, open the rear bonnet …
Fiat 500 (1957-1975 / Epoca) In today's video tutorial, you will see the main steps needed to remove the engine from the body of the Classic Fiat 500. First, open the rear bonnet…
Fiat 500 (2007-2024 / 312) Today's guide shows you the steps to adjust the idle speed of the classic Fiat 500. First, open the bonnet and locate the throttle cable adjuster at …

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos