Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

If you feel a strong vibration in your Fiat 500L, it could be the engine mount

Model: Fiat 500 500 L - Years 2012-2023
Part: Engine mount

In this video, you will see that if you feel a strong vibration inside the cabin (and our YouTuber also explains various ways to rule out that the vibration could be caused by other reasons), it may be caused by the engine mount. You need to remove the cover from the engine, and just below you will find the engine mount, which is very visible and easily accessible. Use a jack to lift the vehicle from the oil sump side, so that the engine rests on the jack and not on the mount. Remove the six screws holding it and take it out. You can find the part, for example, on eBay with the code 274437473813, priced at £77.55 with free shipping. (Always check the version of your vehicle before ordering.) Refit it in place and re-tighten the screws. Remove the jack, reassemble the cover, and take it for a test drive. No vibrations.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear doors and the boot of your Fiat 500L. Begin by unfastening and removing the upper cover of the boot, disconnecting the…
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…
How do you reset the Service light on the Fiat 500L?
How do you reset the Service light on the Fiat 500L?
Fiat 500 (2012-2023 / 500 L) It will be possible to reset the Service light of the Fiat 500L by first inflating the tires: once they have been inflated to the correct pressure, i…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos