Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
Epoca
- Years 1957-1975 In order to replace the rear suspension of a vintage Fiat 500, the car must be lifted using a bridge or a jack, so that the wheels are not in contact with the floor. Once they have been lifted, the suspension components can be disassembled, accessing from the underside of the vehicle. Therefore it will be possible to loosen the bolts that fix the axle shaft, so that the wheel hub can be separated from it. Then you can unscrew the parts that fix the shock absorbers at the top and bottom, replacing everything with new spare parts.
Posted on 24 December 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |