Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly and replacement of the windshield washer fluid reservoir of the Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Operation: Disassembly and replacement of the windshield washer fluid reservoir of the Fiat 500.

Below we will see the instructions that will allow us to disassemble and replace the windshield washer tank of the Fiat 500, following these simple steps. First, it will be necessary to disassemble and remove the front bumper, thus accessing the windshield washer tank; to do this, unscrew the fixing screws found on the sides, as shown in the video. At this point, unscrew the fixing screws of the tank, disconnecting the washer tube; replace the tank with the new one and reassemble everything, pouring the new windshield washer fluid and filling it up to the maximum level mark!


Posted on 7 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - What are the prices of crashed Fiat 500s? Read Answer
    • 500 2014-2022 - What are the most common problems of the Fiat 500 MultiJet? Read Answer
    • 500 2012-2023 - How many kilometers does the 500 go with a full tank of gasoline? Read Answer
    • 500 2007-2022 - How do you turn on the parking lights of a Fiat 500? Read Answer
    • 500 2007-2023 - What does the error message on the Fiat 500E mean? Read Answer
    • 500 2007-2022 - How much does the ownership transfer of the Fiat 500 cost? Read Answer
    • 500 2014-2022 - What does the message "parking assistance not available" mean in a Fiat 500? Read Answer
    • 500 2014-2022 - Why is the keyless system of a Fiat 500X not working? Read Answer
    • 500 2012-2023 - What is the cost to repaint a Fiat 500? Read Answer
    • 500 2014-2022 - How to reset the service light on the Fiat 500 X? Read Answer
    • 500 2007-2022 - Why won't a Fiat 500 start? Read Answer
    • 500 2007-2022 - What to do if the rear wiper on your Fiat 500 doesn't work? Read Answer
    • 500 2007-2022 - What problems are there with the Fiat 500 convertible top? Read Answer
    • 500 2007-2022 - Why doesn't the trunk of the Fiat 500 open? Read Answer
    • 500 2007-2022 - Why doesn't the Start&Stop system on the Fiat 500 work? Read Answer
    • 500 2007-2022 - Where is the fuse for the washer pump located in a Fiat 500? Read Answer
    • 500 2007-2022 - What problems on the Fiat 500? Read Answer
    • 500 2012-2023 - Why doesn't the roof of the Fiat 500L open? Read Answer
    • 500 2014-2022 - What to do if the outside temperature sensor on your Fiat 500X doesn't work? Read Answer
    • 500 2014-2022 - What electronics problems on the Fiat 500x? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos