Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Washer Pump in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Pump

As shown in this tutorial, replacing the washer pump in the Fiat 500 is a very simple and quick task. First, lift the front right of the vehicle with a jack, taking all necessary safety precautions. Then, remove the lower cover of the compartment. Next, locate the pump, which is situated at the base of the windscreen washer reservoir, disconnect the connector, and unclip it by pulling it outwards. Finally, fit the replacement by following the reverse procedure and refill any lost washer fluid.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Washer Fluid in a Fiat 500
How to Replace the Windscreen Washer Fluid in a Fiat 500
Fiat 500 (2007-2021 / 312) How to replace the windscreen washer fluid in a Fiat 500? Let's look at the necessary maintenance on the 500. Open the car door and pull up the engin…
How to Top Up the Windscreen Washer Reservoir on a Fiat 500X
How to Top Up the Windscreen Washer Reservoir on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to top up the washer fluid in the windscreen washer reservoir yourself on a Fiat 500X. First, pull the plastic lever located at the bottom …
How to Change the Fuel Pump on Fiat 500
How to Change the Fuel Pump on Fiat 500
Fiat 500 (1957-1975 / Epoca) Replace the fuel pump on a Fiat 500. Here’s how to dismantle it. Lift the rear bonnet of the car, locate the fuel pump as shown in the video. Use a s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos