Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the windshield wiper and Fiat 500 rear arm

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Windscreen wipers
Operation: Removing the windshield wiper and Fiat 500 rear arm

In this video tutorial we will see how to remove and replace the rear wiper together with the arm of a Fiat 500. First, let's get the new spare parts, making sure they are the right type for our car; after which we are going to remove our arm by unscrewing the nut with a ratchet wrench, as shown in the video. At this point we extract and remove the arm together with the wiper: we separate the old wiper from the arm and let's go and replace it with the new one. So let's go and reassemble the arm together with the wiper, screwing the nut back on!


Posted on 24 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What causes the windshield wiper problem on the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the windshield wipers do not work in the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the Fiat 500 windshield wipers don't work? Read Answer
    • 500 2007-2022 - What is the problem with the windshield wiper of the Fiat 500? Read Answer
    • 500 2007-2022 - What is the cause of the problem with the windshield wipers on the Fiat 500? Read Answer
    • 500 2007-2021 - Why do the wipers no longer work in the Fiat 500? Read Answer
    • 500 2007-2023 - Why does the Fiat 500 rear wiper not work? Read Answer
    • 500 1957-1975 - Where is the water tank for the windshield wipers located in the vintage Fiat 500? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 windshield washer pump located? Read Answer
    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos