Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

Below we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500. First, move to the rear and start lifting the windshield wiper arm; press on the plastic clip and rotate the windshield wiper to remove it, as shown in the video. At this point, install the new rear windshield wiper, of the right type and having the same dimensions; properly secure it to the windshield wiper arm and then lower it, replacing if necessary also the front windshield wipers in the same way.

Posted on 15 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the rear windshield wiper of the Fiat 500
How to change the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2023 / ) Today we will see how to disassemble and replace the rear windshield wiper of the Fiat 500, following the instructions below. First of all, move to t…
How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500, in…
How to replace the rear windshield wiper of the Fiat 500.
How to replace the rear windshield wiper of the Fiat 500.
Fiat 500 (2007-2024 / 312) In the following guide dedicated to those of you who own the new Fiat 500, we will explain in a simple way how to replace the rear windshield wiper. …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos