Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the fuel pump in the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Fuel pump
Operation: How to replace the fuel pump in the Fiat 500?

In this tutorial, we can see how to replace the fuel pump in the Fiat 500, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the doors, unscrew the two bolts indicated with a 16mm socket wrench and remove the seat of the sofa. Then open the central cap, disconnect both the power connector and the fuel tube, and unscrew the large outer ring. At this point, all that remains is to remove the pump from the tank, insert the replacement and reassemble everything following the reverse procedure.


Posted on 18 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2014-2022 - What tool is needed to remove the fuel pump in the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the diesel pump on the Fiat 500 1.5 MultiJet? Read Answer
    • 500 2007-2022 - Where is the Fiat 500 petrol pump located? Read Answer
    • 500 2007-2022 - Why doesn't fuel reach the engine of the Fiat 500? Read Answer
    • 500 2007-2022 - How much does the Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500l diesel pump located? Read Answer
    • 500 2014-2022 - What do the problems with the fuel pump of the Fiat 500 depend on? Read Answer
    • 500 2012-2023 - Where is the petrol pump of the Fiat 500 located? Read Answer
    • 500 2007-2023 - How much can a Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500L float located? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos