Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the fuel pump of the Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Fuel pump
Operation: Replacement of the fuel pump of the Fiat 500.

Here are the necessary instructions on how to disassemble and replace the fuel pump of the Fiat 500. In order to access the fuel pump, it will be necessary to remove the rear seat; then we remove the metal cover of the pump, using a socket wrench to unscrew the screws, as shown in the video. At this point, we disconnect the fuel lines by opening the clamps, and also disconnect the electrical connector of the float; then we remove the pump from the tank and replace it with the new one, applying the reverse procedure!


Posted on 9 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - What tool is needed to remove the fuel pump in the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the diesel pump on the Fiat 500 1.5 MultiJet? Read Answer
    • 500 2007-2022 - Where is the Fiat 500 petrol pump located? Read Answer
    • 500 2007-2022 - Why doesn't fuel reach the engine of the Fiat 500? Read Answer
    • 500 2007-2022 - How much does the Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500l diesel pump located? Read Answer
    • 500 2014-2022 - What do the problems with the fuel pump of the Fiat 500 depend on? Read Answer
    • 500 2012-2023 - Where is the petrol pump of the Fiat 500 located? Read Answer
    • 500 2007-2023 - How much can a Fiat 500 petrol pump cost? Read Answer
    • 500 2012-2023 - Where is the Fiat 500L float located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos