Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Timing belt

The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and start by removing the right front wheel and the wheel arch liner; then we remove the V-belt and subsequently the crankshaft pulley by unscrewing the central bolt, as shown in the video. At this point, we remove the timing cover to access the belt, and then replace it with the new original one; if necessary, we also replace the water pump kit, reassembling all the timing components.

Posted on 15 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will learn how and when to replace the timing belt on the Fiat Bravo 1.6 MultiJet. The timing belt replacement on a small capacity…
Fiat Bravo (2007-2014 / Bravo 2) The replacement of the timing belt on a Fiat Bravo MultiJet vehicle must be carried out based on the condition of the belt and the engine. Generally,…
Fiat Bravo (2007-2014 / Bravo 2) This guide briefly outlines the instructions for dismantling and cleaning the EGR valve of the Fiat Bravo 1.6 Multijet. First, open the bonnet and st…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos