Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and cleaning the EGR valve of the Fiat Bravo 1.6 Multijet

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: EGR valve

See other generations:
Video tutorial

This guide briefly outlines the instructions for dismantling and cleaning the EGR valve of the Fiat Bravo 1.6 Multijet. First, open the bonnet and start disconnecting the pipe located above the valve; then unscrew the fixing screws of the turbocharger hose, unscrewing the fixing screws of the EGR valve to remove it, as shown in the video.

At this point, clean it with appropriate degreasers, replacing the EGR valve if necessary; apply the reverse procedure for reassembling the valve!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Replacing EGR Valve on Fiat Bravo 1.9
Replacing EGR Valve on Fiat Bravo 1.9
Fiat Bravo (2007-2014 / Bravo 2) Dismantle the EGR valve on a Fiat Bravo. Lift the front bonnet, identify the parts to remove to access the EGR valve. Unscrew the locking bolts of th…
Remove the EGR Valve on a Fiat Bravo
Remove the EGR Valve on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To remove the EGR valve, you don't need extensive experience; following our advice will make it a job for everyone. First, gain access to the engine …
How to Replace the EGR Valve on a Fiat Bravo?
How to Replace the EGR Valve on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the EGR valve on a Fiat Bravo, open the bonnet to access the engine bay. The valve is located between the intake manifold and the exhaust …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos