Do it yourself
| ||||
|
Fiat Bravo - Video tutorial
Model: Fiat Bravo
Bravo 2
- Years 2007-2014 To be able to replace the EGR valve on the Fiat Bravo, you have to open the bonnet to access the engine compartment: the valve will be positioned between the intake manifold and the exhaust manifold, behind the engine block. To remove the valve, you will need to loosen all the bolts around it, also disconnecting the connectors. Now, the valve can be removed from its housing, replacing it with a new spare part. The piece will have to be fixed again to the intake and exhaust manifolds with the appropriate screws, also connecting all the connectors.
Posted on 31 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |