Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt on the Fiat Bravo 1.6 MultiJet

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Timing belt

In this guide, you will learn how and when to replace the timing belt on the Fiat Bravo 1.6 MultiJet. The timing belt replacement on a small capacity diesel engine should typically be done every 75,000 miles, depending on the engine's condition; however, the exact interval is specified in the vehicle's user and maintenance manual. To remove the timing belt, follow the usual procedure; first, remove the auxiliary belt and the crankshaft pulley, then take off the timing cover. Follow the video to the end for the replacement!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …
How to Replace the Timing Belt on a Fiat Bravo
How to Replace the Timing Belt on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) The replacement of the timing belt on a Fiat Bravo MultiJet vehicle must be carried out based on the condition of the belt and the engine. Generally,…
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos