Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Alternator from Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Alternator

Replacing the alternator on a Fiat Bravo? First, disconnect the battery terminals. Locate the power battery and disconnect the terminals. Remove the engine cover panel to access the alternator. Use a socket spanner to undo all the securing bolts of the alternator. Once the removal is complete, take it out of the engine bay (disconnect the alternator belt). Take the new replacement part and insert it into its designated space, tighten the alternator bolts, and reconnect the belt. Connect the terminals to the alternator and then to the car battery.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Indicator on a Fiat Bravo
How to Replace the Side Indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Remove the Front Grille of a Fiat Bravo
How to Remove the Front Grille of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you start, exit the cabin of your Fiat Bravo and head to the front grille. Begin by releasing the clips that secure the front grille to its ho…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos