Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Radio/Onboard Computer from a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

In this video, you will see the instructions for removing the original radio to replace it with a 2 DIN unit in a second series Fiat Bravo. First, get inside the car and use the appropriate tools to pull and extract the radio, as shown in the video; then disconnect the electrical connector and the antenna cable located at the back of the radio.

At this point, adapt your new radio by inserting the frame, and modify the wiring if necessary to support the new multimedia system.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the radio from the dashboard of a Fiat Bravo? Let's look at the disassembly of the parts. Use the original or aftermarket metal key…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to remove the original radio from a Fiat Bravo? Let’s carefully see in this video how to carry out the disassembly following the guide. Use the o…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos