Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Alarm on a Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

This guide illustrates how to disable the seatbelt alarm on the Fiat Bravo, as well as on the Punto and Panda; the seatbelt alarms should never be disabled, as seatbelts must be used at all times while driving. Get into the vehicle and move the passenger seat back (this also applies to the driver's seat); locate the electrical connector under the seat, which you will disconnect to disable the sensor and thus the seatbelt alarm, as shown in the video.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Reset the "Service" Light on a Fiat Bravo 1.4
How to Reset the "Service" Light on a Fiat Bravo 1.4
Fiat Bravo (2007-2014 / Bravo 2) Before starting, sit in the driver's seat of your Fiat Bravo 1.4. Activate the instrument cluster by turning the key in the ignition switch. Next, re…
How to remove the gear knob of the Fiat Bravo
How to remove the gear knob of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To disassemble the gear knob located inside the cabin of your Fiat Bravo correctly and safely, you must follow all the steps described in our new gui…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos