Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Bravo
  6. : Shock absorbers

Fiat Bravo - Shock absorbers

Fiat Bravo (2007-2014 / Bravo2)
Replacing the front shock absorber strut on Fiat Bravo

First lift the hood and secure it, then clean the upper strut support nut for the affected shock absorber. Move the rubber seal and unscrew the nut with a 19 …read all…
Posted on 16 February 2024 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacement of suspension springs on Fiat Bravo

If we have exhaust shock absorbers or springs on our car it is better to replace them, let's see how to remove the front springs. We loosen the pins of the …read all…
Posted on 1 December 2023 by ScegliAuto

Airbags (1) Alternator (1) Loudspeaker (3) Shock absorbers (2) Antenna (1) Car stereo (13) Battery (2) Air Vents (1) Arm (1) Spark plugs (1) Glow plugs (1) Bodywork (1) Control unit (1) Timing belt (2) Air conditioning (1) Air conditioning controls (3) -board computer (5) Checks and maintenance (23) Dashboard (3) Mass air flow sensor (1) Brake discs (2) Side indicator light (1) Headlight (4) Tail light (5) Fog lights (4) Air filter (6) Cabin air filter (10) Diesel filter (6) Oil filter (4) Hand brake (1) Clutch (1) Grille (3) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (9) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (2) License plate light (1) Third brake light (3) Handle (1) Engine (7) Engine oil (3) Door panel (7) Front bumper (3) Brake pads (5) Gear Shift Knob (3) Instrument cluster (4) Radiator (2) Fuse box (12) Parking sensors (1) Suspensions (2) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (4) Turbine (1) Valve (1) EGR valve (3) Steering wheel (3)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos